Part-No.: EP94M1, Function: bridge, Standard: HDMI / MHL

EP94M1 is an MHL/HDMI Bridge with MHL or HDMI input and HDMI output. The chip supports 1 MHL/HDMI input port and 1 HDMI output port. The chip supports the resolution up to 720p 60 Hz, 1080p 30 Hz or 1080p 60Hz in PackedPixel Mode. The chip also supports on-chip EDID RAM and programmable passive/active DDC switches to lower down system cost and provide the flexibility for the EDID handling.

 

Features:

3:1 MHL/HDMI to HDMI Switcher / 225MHz 

•Supports 1 MHL/HDMI input port and 1 HDMI output port
•On-chip MHL/HDMI Receiver and HDMI Transmitter core which are compliant with MHL 1.1 and HDMI 1.4b specification
•On-chip Equalizer
•Support wide Frequency Range TMDS Output: 25MHz – 225 MHz TMDS clock
•Support up to 75 Mhz Pixel clock rate (8-bit 1080i/720p 60 Hz) in 24-bit mode and up to 150 Mhz Pixel clock rate (8-bit 1080p 60Hz YCC422) in Packed Pixel mode for MHL input
•Support up to 297 Mhz TMDS clock rate (4Kx2K) for HDMI input
•Support on-chip EDID RAM
•Support on-chip programmable passive/active DDC switches
•Register-programmable via slave IIC interface
•Low stand-by current (< 100 uA) at power down mode
•Pin compatible to EP94M0
•48-pin LQFP package

 

Contact us for your inquiry!

a.krepil@semiconn.com